Two toddlers
Two seat units, side by side
What you need now
Later, as they grow
Fully future-proofed — nothing else needed.
Peach 8 · Double Conversion
Single to Double
Your Peach 8 grows with your family. This guide will show you exactly which parts to add now and what you’ll likely need later as they grow.
Build your double
Choose what each child will travel in. We’ll assume you already own a single Peach 8 with its seat unit and carrycot.
1
Pick an option for each child to see your parts list.
Your double setup
Every combination
All the ways to double your Peach 8
Every double setup starts with the Converter Base Kit. Here’s exactly what each pairing needs now, and what you’re likely to add later.
Twin newborns
Two lie-flat carrycots
What you need now
Later, as they grow
Add a 2nd Seat Fabric once both babies move up into seats.
Twins in car seats
Two infant car seats on the chassis
What you need now
Later, as they grow
Depending on your next stage, you’ll want either two Carrycot Fabrics or two Seat Fabrics.
Newborn & toddler
One carrycot, one seat unit
What you need now
- +Converter Base Kit— that’s it
Later, as they grow
Nothing needed — your existing seat and carrycot cover both positions.
Toddler & baby in a car seat
One seat unit, one infant car seat
What you need now
Later, as they grow
You may want a 2nd Seat Fabric when your baby outgrows the car seat.
Newborn & baby in a car seat
One carrycot, one infant car seat
What you need now
Later, as they grow
You may later need a 2nd Seat Fabric.
The one part every double needs
What’s in the Converter Base Kit
The Converter Base Kit is what turns a single Peach 8 into a double. It includes everything for the second position:
- 01 Seat / carrycot frame
- 02 Canopy
- 03 Converter adaptors
- 04 Raincover
- 05 Bumper bar
Those converter adaptors let you run two carrycots, two seats, one carrycot and one seat, or seat-and-car-seat combinations.
The extras
When you need additional parts
| Part | When it’s needed |
|---|---|
| 2nd Seat Fabric | When you’re running two seat units |
| 2nd Carrycot Fabric | When you’re running two carrycots |
| Lower Car Seat Adaptors | Whenever a car seat sits in the lower position |
| Car Seat Adaptors | For the second car seat when carrying twins in car seats |
Good to know
Common questions
Do I always need the Converter Base Kit?
Yes. The Converter Base Kit is what turns a single Peach 8 into a double — it adds the second frame, canopy, converter adaptors, raincover and bumper bar. Every double configuration starts here.
I have a toddler and a newborn — what do I need to buy?
Just the Converter Base Kit. Your toddler rides in your existing seat unit and your newborn rides in your existing carrycot, so there are no extra fabrics to buy. It’s the simplest double to set up.
What do I need for two toddlers in seats?
The Converter Base Kit plus a 2nd Seat Fabric, since you only have one seat fabric to begin with. This setup is fully future-proofed — there’s nothing more to add.
What about twin newborns in two carrycots?
You’ll need the Converter Base Kit plus a 2nd Carrycot Fabric. Later, when both babies move up into seats, you’ll want to add a 2nd Seat Fabric.
When do I need car seat adaptors?
You need Lower Car Seat Adaptors whenever a car seat sits in the lower position. For twins in two car seats, you also need the upper Car Seat Adaptors for the second seat.
Will I have to buy more parts as my children grow?
Sometimes. Carrycots and car seats are used in the early months, so as babies grow into seats you may need a 2nd Seat Fabric. The builder above flags exactly what each setup is likely to need later, so you can plan ahead.
Ready to double up
Found your setup? Start with the Converter Base Kit.
It’s the foundation of every Peach 8 double. Add your fabrics and adaptors from the list above and you’re ready to roll — two on board.
Shop the Converter Base Kit →